When successfully connected the progress bar will run and change it colors and wait until you dialog window saying Download Ok.
5-inch Multi-touch Capacitative Screen, 480×854 pixels
After finish downloading all files put in one folder in desktop to easily navigate the files.
3. Click on Load packet and add the .pac
5. During the flashing your mobile will restart automatically
< this instruction I will use UpgradeDownload and a Use Cherry Mobile Pac file as a sample. In UpgradeDownload window, click on single gear icon to Load Packet and browse for pac file(firmware/stock rom) you downloaded then click open
Below is the Instruction you should do to remove FRP lock on your Samsung J1(SM-J120H). Pre-Requisites: Odin SM-J120h frp reset A…
5. During the flashing your mobile will restart automatically
1.Download the SPD_Upgrade_Tool_R4.0.0001 latest version,Then extract to your desired location.
Installing DriversFirst thing first,Before you can flash/install rom in your phone you must secure first that your phone is detected in your PC.
1. Unpack ROM and extract LAVA_A59.pac
How To Flash Using Research Download
3. Click on Load packet and add the .pac
1. Unpack ROM and extract Starmobile_AndroidL_v13.0_01262016.pac
How To Revive Deadset MyPhone Rio Junior with Tested Firmware
Restore yong IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in SettingsDevoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI.
1. Unpack ROM and extract Starmobile_AndroidL_v13.0_01262016.pac
You need this firmware/stock rom if you have encountered this kind of problem in your phone.Listed Below
Click Scatter-loading and browse for MT6572_Android_scatter
Starmobile Diamond S2 Firmware Download Link
Install ROM:FactoryDownload/UpgradeDownload
3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard…
3-Axis Gravity, Proximity, Light, Accelerometer
How To Flash GT-E1200Y Using Volcano Box with Tested Flash Files
2000 mAh Li-ion, up to 4 hours talk time, 250 hours standby time
1. This is the first time that you will connect your phone and it will search for the correct driver.
Connect your phone in PC using Micro USB Cable in turn-off mode and open Drivers Auto Installer andrun the install-window batch file.Like shown in the image.
Some workarounds:If you encounter PMT_Changed error here is what you do:In Older Version of FlashToolLoad the scatter fileClick in Format (a new menu will popup)Make sure that you select Format whole flash except bootloader then press OKConnect your phone in bootmode (Turn off your device then hold Volume UP or VOLUME DOWN then insert USB)It should detect your phone and continue to flash.Then Click Download to fully flash your phone.Hard Reset your phone after flashing.In Latest version of FlashtoolLoad the scatter fileChoose Format + Download (Underneath Scatter-loading file)Then Click Download and wait until it is done flashing
Very Important files you need to Download:Research Download
Asus Zenfone Selfie [ASUS_Z00UD] Hang on logo FIX using this file via Commands
5. During the flashing your mobile will restart automatically
MyPhone Agua Rio Fun Firmware [Download Link] Download This: MyPhone Agua Rio Fun Firmware password: myphoneasp2013 Sp Flash Tools …
2. Check include this location … … and click on browse. Look for USB VCOM Driver and Click on 2K_XP_COM folder if you are using Windows XP or Win7 for Windows 7 and then press OK when you are done picking the right folder for the driver.
5MP AF with Backside Illumination (BSI) rear camera, 2MP FF front camera, Video Capture: 1080p @ 30fps
3.Now,check all box and manually add all files and connect your phone while turn-off mode
2. Run UpgradeDownload or FactoryDownload, connect your android device to the computer
HI! In this post i will share How you can fix your Asus Zenfone Selfie [Asus ZOOUD] in hang on logo situation!I will flash the firmwar…
If any questions?Use the comment system below!
2.Open your extracted files and run ResearchDownload.exe, For lower version open Bin folder and run UpgradeDownload.exe.
The drivers will automatically installed in your PC.
How to Flash Firmware using Research Download:
Flashing/Install new Firmware/Stock ROM
2. Run UpgradeDownload or FactoryDownload, connect your android device to the computer
Some firmware files may be zipped. Please use eitherWinRARor7-Zipto extract. If a firmware file has been divided into multiple parts, use either program to combine into a single file.
A lot of asking me via e-mail and pm in facebook How To Revive Deadset MyPhone Rio Junior?For those who keep on asking me,heres the t…
3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.
*NOTE:UpgradeDownload and ResearchDownload is the same, UpgradeDownload is just the name of the lower version but they are both SPD Upgrade tool.
Then Click Download to fully flash your phone.
2G GSM: 850/900/1800/1900 MHz, 3G UMTS/WCDA: 850/2100MHz, HSPA+: Download up to 21.1 Mbps
2. Check include this location … … and click on browse. Look for USB VCOM Driver and Click on 2K_XP_COM folder if you are using Windows XP or Win7 for Windows 7 and then press OK when you are done picking the right folder for the driver.
How To Remove FRP Lock on Samsung J1 2016 (SM-J120H)
If you flash this firmware on your phone this following will not work:
Heres the tested firmware ofStarmobile Jump HD Firmware which you can use to flash to yourStarmobile Jump HD using Upgrade Download software.
Wireless Internet and File Transfer, FM Radio, GPS + A-GPS, OTA Update
Make sure that you select Format whole flash except bootloader then press OK
2. Run UpgradeDownload or FactoryDownload, connect your android device to the computer
Starmobile Play Style Tested Firmware
You need this firmware/stock rom if you have encountered this kind of problem in your phone.Listed Below 1.Hang in logo 2.Rebooting 3.B…
MyPhone Rio Craze How To Hard Reset My Phone Rio Craze Do A hard reset using hardware keys if you forget your pattern password or…
How To Hard Reset MyPhone Rio Craze
MyPhone Agua Rio Fun Firmware [Download Link]
Connect your phone in PC using Micro USB Cable in turn-off mode and open Drivers Auto Installer andrun the install-window batch file.Like shown in the image.
Below is the download link of Oppo Neo 5 [1201 16GB] Firmware which you can use for restoring your smartphone in any case that you get into…
The drivers will automatically installed in your PC.
Heres the Firmware of OPPO R1001 .This firmware is very much working (Tried and Tested many times).. This firmware which you can us…
2.Click Scatter-loading and browse for MT6582_Android_scatter
Click in Format (a new menu will popup)
Connect your phone in PC using Micro USB Cable in turn-off mode while pressing Volume Up or Volume Down.This will detect and look for the driver.
Flashing the firmware is very easy if you have patient and common sense.You have to download first the firmware and the Upgrade tools which I have to share below this post.
3. Click on Load packet and add the .pac
Heres the tested firmware ofStarmobile Play Style Android 4.4.2 which was back-up using Infinity CM2 Dongle and converted to Research Download pac file format.
7.After you flash the firmware, you can now turn on your phone, take note that first time start up may took long. but if it tooks more than 15 minutes then I suggest to perform a hard reset.
5.Turn off first your phone, remove battery (if removable) then bring it back. In ResearchDownload/UpgradeDownload Click on Start Downloading, then in your phone press Volume up and Volume down then connect USB cable. If you see a a progress bar, then it means that it is successfully connected. if not, then try step 5 again.
Hard Reset your phone after flashing.
SPD_Upgrade_Tool_R4.0.0001 latest version
Yes you read it right TESTED!Because I fix my customer phone using this firmware.I just found it on google so basically im not the owner of this firmware and im lazy to upload it on my own.So I just share here the download link of the firmware of this phone.
Dont Forget to like us on Facebook and Follow us on Google+
512MB RAM + 8GB ROM, 32GB Micro SD Max Expansion
Your Phone/Tablet must be rooted first
First of all this firmware is not the stock rom/firmware ofStarmobile Play Click.But if you are willing or just want your phone to be use in just text and call!This firmware is you looking for…..
The Problem of this phone is phone lock,Ive tried in Z3X Box and I get some error.Since this phone is SPD Chip so I try in Volcano Box….
4.Loading a pac file may took long depend on file size. After loading a pac file, now ready to start flashing, You can also click on Settings on two gear icon if you want to unchecked some part of firmware like EraseRuntimeNV, This will not work on lower version. I recommend that leave it unchanged if you dont have any idea
6.Wait until you see a Passed in progress, that means, you installed a new stock rom successfully.
Apple has released iOS 11.1.2 for iPhone and iPad users. The small point release software update appears to primarily focus on solving two …
Downloads:Starmobile Diamond S2 FirmwareVCom Drivers
Then Click Download and wait until it is done flashing
Connect your phone in bootmode (Turn off your device then hold Volume UP or VOLUME DOWN then insert USB)
This was tested on two units ofStarmobile Play Style and its working very fine.
Choose Format + Download (Underneath Scatter-loading file)
Below is the download link of Oppo Neo 5 [1201 16GB] Firmware which you can use for restoring your smartphone in any case that you get into…
Flashing/Install new Firmware/Stock ROM
If you encounter PMT_Changed error here is what you do:
After finish downloading all files put in one folder in desktop to easily navigate the files.
3.Now,Click Download and connect your phone while power off.
Oppo Neo 5 [1201 16GB] Firmware Download Link
Connect your phone in PC using Micro USB Cable in turn-off mode while pressing Volume Up or Volume Down.This will detect and look for the driver.
Starmobile Play Style Tested Firmware
Installing DriversFirst thing first,Before you can flash/install rom in your phone you must secure first that your phone is detected in your PC.
Starmobile Roar Firmware Download Link
Starmobile Jump HD Firmware Download Link
It should detect your phone and continue to flash.
4.When successfully connected the progress bar will run and change it colors and wait until you dialog window saying Download Ok.
Oppo Neo 5 [1201 16GB] Firmware Download Link
1. This is the first time that you will connect your phone and it will search for the correct driver.
Starmobile Play Click Debrand Firmware
Heres The firmware ofStarmobile Roar which you will need if you have encounter software problems like Hang in logo,Rebooting,Bootloop and Dead Phone But detected in PC.Download all files below and use extractor zip software to extract the files and put in one folder in desktop to easy navigation in your PC.
For Invalid IMEI:Your Phone/Tablet must be rooted firstRestore yong IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in SettingsDevoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI.
